Have you been Irritated from the high beams from oncoming
vehicles during the night?
If yes then you are in the right place.
however indian scooters do not come fitted with a pass light
feature except for the TVS jupiter.
the following instructable will tell you how to add a pass
light to your scooter under 100 Indian Rupees.
I have succesfully managed to do this on honda activa and
honda DIO and hence it should also work for honda aviator, Hero Pleasure and
Suzuki Access
Step 1: Materials , Tools Needed
- TVS
Jupiter's Hi-Low beam switch which has got pass light feature.
costs around 95-98 rupees - 1m
automotive wire.(speaker wire will also work)
- wire
stripper
- Insulation
Tape
- File
tool
- Multimeter
if you want to be sure of your connections.
- common
sense
Step 2: Making the Space
Take out your existing Hi-Low switch button from the dash of
the scooter.
The pass light switch button is little large on its sides so
use the file tool to file a little portion of the dash to fit in the button.
Step 3: Connections
Take out your existing Hi-Low switch button from the dash of
the scooter.
The pass light switch button is little large on its sides so
use the file tool to file a little portion of the dash to fit in the button.
The stock wiring connector has 3 wires. Middle is supply and
right and left are high and low output wires.
The new button comes with 4 wires and a connector. First get
rid of the connector by cutting it out.
Refer to images for further connection.
Connect the middle Brown wire (stock)
which is the supply from the stock wiring to the yellow with green
stripe color wire of new button which is the suppply.
similarly stock white wire low beam
to white with red stripe color wire
and stock Blue wire to combination
of yellow and green color wire
The Last remaining orange wire from the
switch has to be given a +12vdc from the ignition switch As this is where the
output for the pass functionality is going to be supplied.
So run a wire from the ignition switch to this wire and
connect it. in my case i have used a speaker wire.
Note: Make sure you do all connections properly and
correctly as it can damage your electrical system if done incorrectly.
For other scooters other than activa please check the
wires operation before connecting.
Step 4: Testing
For other scooters other than activa please check the
wires operation before connecting. Test all your connection.
once everything works fine use insulation tape to cover
up the joints.
Step 5: Enjoy
Enjoy your pass light on your scooter.